Show Bid Request
Flowchart and Assembly code
Bid Request Id: 9213
|
|
|
|
Posted by: |
Hootie (8 ratings)
(Software buyer rating 10 )
|
|
Non-action Ratio: |
Very Good - 0.00%
|
Buyer Security Verifications: |
Good
|
|
Approved on: |
Feb 20, 2002
11:25:55 PM EDT
|
|
Bidding Closes: |
Feb 24, 2002
11:28:01 PM EDT
|
|
Viewed (by coders): |
397 times
|
|
Deadline: |
2/25/2002
TIME EXPIRED
|
|
|
|
|
Description:
Lab help!! There are 8 stations in a plant that have 3 parameters (voltage, current, and temp.) that must be kept within certain limits. provide system monitoring and check for defective equip. REQ: each station must be monitored every 4 or 5 seconds for changes in any of these values. (Note to start these values will be available in a block of memory starting at address DATA. Data Format: 1st byte station number 01-08 hex, 2nd byte Voltage reading 00-99 hex, 3rd byte Current reading 00-99 hex, 4th byte Temp. Reading 00-99 hex. Before the 8 sets of values for DATA can be used, they must be transferred from another location in memory labeled INPUTS. Therefore, part of your task will be to move the values in INPUTS locations to the DATA locations. The voltage, current, and temp. Values determined at that time are to be checked against an upper and a lower limit. Values for the upper and lower limits for voltage, current and temp for all 8 stations will be available in a block of memory starting at address LIMITS in the format listed below.
LIMITS Format: 1st byte Voltage Upper limit 00-99 hex, 2nd byte Voltage Lower limit 00-99 hex, 3rd byte Current Upper limit 00-99 hex, 4th byte Current lower limit 00-99 hex. 5th byte Temp Upper limit 00-99 hex, 6th byte Temp Lower limit 00-99 hex.
What I need:
1. Is a flowchart of the program matching the operation of the program.
2. A printout of the assembly language source program with comments on each line of code, main program header, and subroutine headers.
We are using the Motorola 68HC11 EVBU boards
Deliverables:
Complete and fully-functional working program(s) in executable form as well as complete source code of all work done.
Complete copyrights to all work purchased.
Platform:
must be able to produce .s10 file with motorola 68HC11 board
Must be 100% finished and received by buyer on:
Feb 25, 2002 EDT
Deadline legal notes: All times are expressed in the time zone of the site EDT (UT - 5). If the buyer omitted a time, then the deadline is 11:59:59 PM EDT on the indicated date.
Special Conditions / Other:
Most important thing right now is the flowchart and the transfer of INPUT values to DATA and the accessing of the DATA for the 8 stations
Remember that contacting the other party outside of the site (by email, phone, etc.) on all business projects < $500 (before the buyer's money is escrowed) is a violation of both the software buyer and seller agreements.
We monitor all site activity for such violations and can instantly expel transgressers on the spot, so we thank you in advance for your cooperation.
If you notice a violation please help out the site and report it. Thanks for your help.
|
|
|
Bidding/Comments:
|
All monetary amounts on the site are in United States dollars.
Rent a Coder is a closed auction, so coders can only see their own bids and comments. Buyers can view every posting made on their bid requests. |
See all rejected bids (and all comments)
| Name |
Bid Amount
|
Date |
Coder Rating |
|
|
|
This bid was accepted by the buyer!
|
$40 (USD)
|
Feb 21, 2002
1:16:12 PM EDT
|
7.88
(Very Good)
|
|
|
Hello,
I am a systems Programmer and have studied Comp. Engineering. I am well versed in INTEL and MOTOROLA based coding. I have studied your requirements well and will be able to give you well commented code and the flow chart. The project seems to be good and I hope to start coding as soon as you accept my bid.
Thanks,
Sourav.
New Delhi, India. |
|
|
|
|
|
|